Need a swap guru of the g6 world - Pontiac G6 Forum
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 03-11-2016, 11:37 AM Thread Starter
Junior Member
 
Join Date: Apr 2015
Posts: 3
 
Need a swap guru of the g6 world

okay so i have a 06 gt 3.5 i was looking in too getting a 3.9 from the gtp convert it to manual (can cost a lot but i can do the job myself and have lot of connection to get parts cheap and lot of peeps to help me along so please dont say you should just buy a gtp or whatever) i want to know the technical sutff behind it. like are the mounts the same ? is both engine basicly the same just remove 3.5 and put 3.9 like a standard my engine blew up repair and i was also looking at the 3.6 L HO VVTI any inputs on this matter ?
newtoG6 is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 03-27-2016, 08:22 AM
Junior Member
 
Join Date: Mar 2016
Location: Michigan
Posts: 3
 
I'm in the process of installing a 3.6L VVT from a 09 g6 GXP into a 05 g6. Engine and trans bolted right into place. I had to retain the rear frame mount from the 05 but all other mounts matched right up. I also used the engine harness from the 3.6L for obvious reasons. I haven't completed the swap yet but just letting you know its being done right now.
G6Swapper is offline  
post #3 of 4 (permalink) Old 03-29-2016, 08:16 AM
Moderator
 
waterfowler76's Avatar
 
Join Date: May 2009
Location: Las Vegas
Posts: 3,757
 
Send a message via Yahoo to waterfowler76
please keep us updated!

2007 PONTIAC G6 GT

Waterfowler's 6 <---- Check out my 6
waterfowler76 is offline  
 
post #4 of 4 (permalink) Old 03-30-2016, 12:25 PM
Junior Member
 
Join Date: Mar 2016
Location: Michigan
Posts: 3
 
Update.........everything is connected and hooked up except the wiring from the car to the ecm. Does anyone have a wiring diagram for the plug from the inside of the car to the ecm. The plugs are different from the 05 to the 09. The 05 has 25 wires and the 09 only has 21. I have power throughout the car but it won't crank over due to the plugs being different. My plan (if I can find the diagram) is to splice the plug from the 09 to the wiring harness of the 05. I have a complete 09 GXP donor car and have used the engine harness, ecm and bcm from the 09. Any help would be a life saver guys.
G6Swapper is offline  
Sponsored Links
Advertisement
 
Reply

  Pontiac G6 Forum > Technical Discussion & Modifications > Powertrain Performance Modifications

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac G6 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
new to the G6 world! Adnan Ahmadi New Member Introductions 7 03-15-2011 06:32 PM
New to the pontiac world boostedirl New Member Introductions 5 11-12-2010 09:50 PM
New Girl to the G6 World NVMYG6 New Member Introductions 13 08-07-2009 09:16 AM
I'm King of the World! Fusion Off-Topics 2 07-28-2008 05:28 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome