Pontiac G6 Forum banner

power steering pump replacement

18K views 4 replies 3 participants last post by  waterfowler76 
#1 ·
Hello. I have an 07 G6 and I need to replace the power steering pump. I am aware of the procedure for the pulley removal but there is a bolt at the bottom of the pump that requires a crows foot wrench (reg wrench won't fit). Can anyone tell me the size of that crows foot wrench?
 
#4 ·
As I recall - it's been a while and I tend to munge my 3.5 LZ4 with my 3.4 liter motors - there are three mounting bolts on the power steering pump, and all are accessible thru the openings in the pulley wheel.

Still, in most cases, the wheel needs to be removed in order to free the pump. And, IIRC, it's easier to remove the wheel while the pump is still bolted in place.

I had to replace the high pressure hose on my G6 a few years ago, and that's how I got familiar with the pump :)

Doug

.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top