Join Date: Oct 2010
Location: Winnipeg, Manitoba, Canada
Its not the EE. Sometimes that pin thing gets stuck...id suggest putting some lube on it once u do get it out.
Once all the pins and screws are out...
Yank the outside part of the headlight to pull it out of that pin / hole thing. My stock headlight was the hardest to get out as it had been in there since being assembled. ( to my knowledge) Either way i just kept pulling, harder, harder, harder...i was afraid to break it but since you have already done it before you must know what the part looks like....just pull it out....its stuck for w.e reason.
Maybe wedge something in between and pry it slowly...something soft that wont damage either the headlight or the 1/4 panel
Black 06 GTP Coupe
Performance: Full CRABs | RacingLine street MMIs + STB
Appearance: Tint - 35%r, 45%f | Tinted Alteza Tails | Black Halo Proj Eagle Eye Headlights |5000k HIDS in low and fogs w/ 100w hal in high | Red Leds under dash and behind grilles | White LED Interior Bulbs + Trunk, Plate | Bebadged w/ black overlays