Installing foglights in G6 that did not come equiped with them - Pontiac G6 Forum
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 05-08-2010, 02:02 AM Thread Starter
Junior Member
Join Date: May 2010
Posts: 16
Installing foglights in G6 that did not come equiped with them

I got my G6 and added a spoiler, sunroof and custom embroidered floor mats and well as a lot of little details. I want to add fog lights and this makes me pause. I am concerned about cutting into that plastic "grill" in the bumper area and can find no helpful information about doing it.
The wiring is another issue. I would like to be wired into the headlights without a separate switch but admit this is something I have not tried before.
Any helpful advice, pointers or links would be very much appreciated.
Maureen is offline  
Sponsored Links
post #2 of 4 (permalink) Old 05-09-2010, 08:49 PM
waterfowler76's Avatar
Join Date: May 2009
Location: Las Vegas
Posts: 4,044
Send a message via Yahoo to waterfowler76
maybe this will help you out a little bit.


Waterfowler's 6 <---- Check out my 6
waterfowler76 is offline  
post #3 of 4 (permalink) Old 05-09-2010, 10:40 PM Thread Starter
Junior Member
Join Date: May 2010
Posts: 16
Thank you

Thanks for the link. I will attempt most things and just dive right in but this one makes me nervous. I think it's because I have to cut that plastic grill and we all know plastic can be a hard thing to cut cleanly. I was also concerned about what to wire it from and this clearly lays out how he wired it. I did notice he sort of skims over how her cut he grill so I hope that implies it was easy.
Thank you for the help.
Maureen is offline  
Sponsored Links
post #4 of 4 (permalink) Old 05-10-2010, 04:11 AM
Decepticon Extraordinaire
Lampoon's Avatar
Join Date: Sep 2005
Location: The Alamo
Posts: 5,348
There are bits for a dremel that go through plastic like butter.
Just take your time and dont be in a hurry when using it.

Rototool also makes some nice bits to go through plastic.

Crab Intakes CAB, MPD Ram Air hood, Custom exhaust,
WAMS High Performance Tune and a whole lot more....

My Progession
Lampoon is offline  
Sponsored Links

  Pontiac G6 Forum > Technical Discussion & Modifications > Appearance Modifications and Lighting

Quick Reply

Register Now

In order to be able to post messages on the Pontiac G6 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Lowering Springs jamestg6gt07 Handle It! - Suspension, Wheel and Tire Modifications 15 09-14-2013 01:25 AM
Installing Alarm eyeballs66 Car Audio, Video and Security 0 01-13-2010 05:34 PM
Installing XM/Sirius in an 07 G6 Farslasher Car Audio, Video and Security 0 04-24-2009 08:56 PM
a little help with installing new bumper?? gsixxer Problems and Solutions 2 10-08-2008 07:51 PM
need help installing aftermarket headunit asianman35 Car Audio, Video and Security 1 02-10-2006 10:04 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome