How to remove Engine cover 2.4L - Pontiac G6 Forum
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 07-04-2012, 11:25 PM Thread Starter
Junior Member
Join Date: Oct 2011
Location: Palm Bay
Posts: 9
How to remove Engine cover 2.4L

i tried searching for a post on how to remove the engine cover on the 2009 pontiac g6 2.4L but couldn't find one. i manage to get mine off without heavy force. they are:
(1) 2 rubber fitting at the back on both side that need a little tug to prop up.

(2) the oil filler cap.

(3) the clamp from the air box after the MAF.

(4) and another clamp on where the cover sits on the throttle body.

(5) there is a little hose on the front left of the cover which you will have to release the clamp to get off as well.

hope this will help you guys who haven't figure it out yet. be careful on refitting the cover on the throttle body because the rubber seal will tear. there was a little tear on mine from previous owner but not too bad. good luck and hope this helps

Last edited by GizmoG6; 07-05-2012 at 12:00 AM.
GizmoG6 is offline  
Sponsored Links
post #2 of 3 (permalink) Old 07-05-2012, 03:54 PM
CruisinG6's Avatar
Join Date: Jul 2009
Posts: 4,232
Yea mine got torn up as well. but I no longer use it because I have an intake in place.
Older G6s with the 2.4 have a 2-piece cover. So it's not one piece with the intake like ours is.

Personally I think the 2.4 looks better without a cover
CruisinG6 is offline  
post #3 of 3 (permalink) Old 07-06-2012, 09:10 AM Thread Starter
Junior Member
Join Date: Oct 2011
Location: Palm Bay
Posts: 9
yea with the older ones you could take off the plastic cover and be ok but these newer ones its all one piece. i'm going with CAI soon for sure.
GizmoG6 is offline  
Sponsored Links

  Pontiac G6 Forum > Technical Discussion & Modifications > HOW-TO

Quick Reply

Register Now

In order to be able to post messages on the Pontiac G6 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Remove Plastic Engine Cover? y84pauloflondon General Maintenance 13 08-22-2015 07:00 AM
How do I remove the rear bumper cover? gkb13 Problems and Solutions 6 11-08-2013 01:25 PM
how do i remove the rear bumper cover on my vert cmf9040 Problems and Solutions 0 03-10-2011 11:31 AM
How do I remove the center console shift cover lcplmouw Problems and Solutions 2 10-15-2009 04:16 AM
my engine cover blkgtpconvtgirl Appearance Modifications and Lighting 7 05-13-2009 11:41 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome