How to seafoam 3.5 LZ4 - Pontiac G6 Forum
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 08-11-2014, 09:23 PM Thread Starter
Moderator
 
waterfowler76's Avatar
 
Join Date: May 2009
Location: Las Vegas
Posts: 4,026
 
Send a message via Yahoo to waterfowler76
How to seafoam 3.5 LZ4

Had a member ask me for tips on seafoming the 3.5 V6. And since I took some pics about a year ago, I figured I'd write a quick how to for anyone that needs some help.

First I disconnected vac hose from intake manifold.


connected a piece of extra hose in it's place.


Used about half a can.


now while you have someone feather the gas pedal you can suck up the seafoam.


once its all sucked up turn off car and let it sit a few minutes. then start engine and watch the cloud of carbon fill you street.

2007 PONTIAC G6 GT

Waterfowler's 6 <---- Check out my 6
waterfowler76 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 08-12-2014, 06:37 AM
Member
 
Join Date: Jan 2013
Posts: 39
 
Thanks perfect!!
Bgmyke1 is offline  
post #3 of 3 (permalink) Old 08-12-2014, 03:30 PM
Senior Member
 
mshinall's Avatar
 
Join Date: May 2010
Location: NoVA
Posts: 636
 
Does the work the same as using the seafoam spray?

2009 Techno Gray Metallic G6 GXP Sedan (3.6L Auto6 112K miles)
---
CRAB Intake Opt 3 w/FPU, Lloyds GXP floor mats, HIDs low 6000k 55w/fog 3000k 35w, LED DRLs behind lower grills, V3 Triton LED turn signal/reverse/brake, LED side markers/maps/dome/tag/trunk/high mount stop, 2 coats niteshades on tails, Tint 35% all around, Debadged (except arrows), PAC IPod and BT adapters, PowerStop D/S rotors and ceramic pads, Resonator repl w/24" cherry bomb, Racingline STB, Big 3 Upgrade, Optima Yellowtop D75/25, Blacked out arrows, chrome window trim and black dipped wheels, KYB struts and shocks, CM lowering springs, Cherry Bomb Vortex Crossflow muffler, 2.5" pipe from axle back, two 4" stainless double walled slant tips
...still working...
mshinall is offline  
Sponsored Links
Advertisement
 
Reply

  Pontiac G6 Forum > Technical Discussion & Modifications > HOW-TO

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac G6 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
HOW-TO Run Seafoam through the vacuum on your 2.4l 4cyl CruisinG6 HOW-TO 3 09-12-2013 02:11 PM
Help Needed Seafoam THusted General Maintenance 2 07-23-2013 09:53 PM
LZ4???? How do I tell if thats the engine in my ride bimmer83 G6 Buyer's Guide/General Information 16 06-12-2011 07:58 AM
Seafoam anyone? KB G6 General Maintenance 9 09-13-2009 06:26 AM
LZ4 Engine Dyno Beodude123 G6 Buyer's Guide/General Information 5 02-28-2009 06:33 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome