Adding Bluetooth receiver to Stereo
1 - 6 of 6 Posts
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Would this work?
Car Audio, Video and SecuritySince from the factory, the Monsoon system sends a line level signal from the head unit to the amp, what about putting RCA ends on the factory wires and then an amp in place of the factory one when replacing the head unit. The factory wires would then still just carry a line level signal which...- 10
- 247
-
smccloud · updated
-
Keep factory speakers?
Car Audio, Video and SecurityI just got an '07 GT with the Monsoon audio. However since it doesn't have Bluetooth I'm going to be swapping in the Pioneer I currently have in my Subaru Impreza (Minnesota hands free law). Is it with tracking down factory rear speakers? Both are missing. Or should I just budget bypassing the...- 6
- 194
-
smccloud · updated
-
G6 Monsoon Amp Bypass/Removal Diagram
Car Audio, Video and SecurityI searched everywhere for this info, on this site, all over the internet, etc and couldn't find it. So I did the job and made this wiring diagram to help anyone else doing this. Hopefully it's helpful to someone. Use this if you're adding an aftermarket head unit and speakers to your 2006...- 5
- 6K
-
xStYleSx · updated
-
AM Stereo Install with Monsoon Help
Car Audio, Video and Security-2005 G6 Yea so I gave up trying to fix the radio. Id like to install this aftermarket one I had lying around if its not too much trouble. This is really the only kit I can find but it says it will not work with Monsoon...- 8
- 426
-
New speaker setup for pontiac g6 with factory amp
Car Audio, Video and SecurityHey guys, new owner of a 2006 pontiac g6 here. I was going to replace my two door speakers with 50 RMS 100 peak, Dual, door speakers and 100 RMS, 600 watt peak rear speakers (Pioneer TS 6900pro). Does anyone know what the factory amp wattage is of the 2006 g6 or if I would need to upgrade the...- 2
- 466
Join now to ask and comment!