[Bambamm]

Left the dealership and went directly to the shop to take starter pictures:

1st Mod: 5/30, I pulled off the stock tail lights and put on the LED Tail Lights. Picture isn't too clear, but it will do for now.

2nd Mod: 6/2, Wheels/Tires & Eiback Lowering Kit, DONE! Swapped out the mouldings at the doors. Notice no chrome on the door moulding??

3rd Mod: 6/3, Put on the Front Pipe Upgrade. I made a slightly larger hole and popped the vacuum tube into the hole and sealed the penetration around it. I've gotta take the male portion of the stock vacuum connection off the stock intake, and then seal it to the silicone bend that goes to the throttle body! How's it Look?

 

[Bambamm]

4th Mod: 6/5, Got the Full CRAB Option #3 installed. It took some modification, but I got it. No CEL, yet, and I've ran it like this since Saturday morning. Kept every stock part this time, if I ever need to take it to the dealer for warranty work, luckily it's easy to put back into place. I am going to assemble a make shift filter, for the tube going out the back, I took the little thing I had in its place off for pictures.

And the pipe is so secure, even though I did use 1 of the 2 claws, the other claw got damaged in the accident.

5th Mod: 6/5, Removed the muffler and put an AERO Exhaust resonator in it's place. I'll get a better video, but this is for starters.
[youtube:1e1riiq2]http://www.youtube.com/watch?v=UAVv-OYOVwY[/youtube:1e1riiq2]
and pictures of the muffler/resonator

6th Mod: 6/7, Strut Tower Bar

6/11: Windows Tinted!!!!!!!!

 

[Bambamm]

6/12: Intake Resonator Deleted and HID's from DDM Tuning Installed.....read below about the DDM HID Lights, too

6/12: HID'S installed. DDM Tuning, what's supposed to be 8000k bulbs.....
No HID Pictures yet! So i put the first HID bulb in and twisted it, SNAP, went one of the tabs. JUST PHUCKING GREAT, RIGHT!!! It's ok, it's good and secure......Put the second one in and you'll never guess..........SNAP, TWO PHUCKING TABS THIS TIME.....Luckily I still have the 1 good HID bulb from the other car, so I went to my office and put it on. GREAT, RIGHT, NOT REALLY! While putting the bulbs on, I noticed the filament isn't the same color as the ones I had installed on the gold one. THEY SENT ME 6000K, I'm sure of it, cause you can totally tell the difference in the lights. I'll take a photo and post it tonight or tomorrow. DDM must either think people are ignorant or just dont know any better? I'm going down to San Diego next weekend to see my brother and MAYBE ERIK, TOO!!!!! I'm thinking about making a trip over to DDM Tuning so they can swap out both of my bulbs for me.

Here's the video I mentioned: It's kinda shitty, but oh well, what can you do.

6/15: Debadged all but the Pontiac Arrows, I'm going to do the Carbon Fiber Overlay that I had done on the Gold G6.

6/26: 10th Mod - Carbon Fiber Overlays on both pontiac arrows and for trial, the Key Hole for the trunk!

7/21: Got My Plates Back On The Ride!

 

[Bambamm]

8/8/2010: WHAT AM I UP TO???? Dual Valence.......I've got something in my back seat, too. Pictures of that when I'm done! Here's the valence for now!!!!

8/9/2010: GTR Installed.
Video is very low quality as I took it to send to a few MMS people. High Quality Video this afternoon. I didn't remove the 3rd Cat, however, I don't see why I can't remove it and return it when it's time for CA Emissions Test in 2013.

From the rear, giggity!

View from the top to show how far they don't stick out.

[/QUOTE]

 

[Bambamm]

 

[Bambamm]