Pontiac G6 Forum banner
1 - 4 of 4 Posts

· Premium Member
Joined
·
5,786 Posts
mine were fine....I didnt notice that.
I velcro'ed my ballast to the top of the rail. Wire side down.
You can stick it to the bottom of the light as well.
 

· Premium Member
Joined
·
5,786 Posts
Actually I think there is a spot on the bottom of the headlight to mount it to.
I put velcro on it and mounted it to the top of the horn (frame rail).

It will keep it cool. Since one side of it is concave I put that side down so if water got back there it wouldnt stay on it or seep into the ballast via the wires. basically the opposite side of the ballast. One side has the 3M tape and one side has velcro. So it can still be used... Since the wires come out the concave edge side it just makes sense to put that side down.

I have a feeling im not making any sense. but yeah....you can mount it on the light itself or wherever the wires allow it to reach.
 

· Premium Member
Joined
·
5,786 Posts
It depends on what your going for....I think both look good.
Its an obvious upgrade either way.



If you cant decide, I recommend you flip a coin.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top