Pontiac G6 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
The person who designed those headlights should be put up against the nearest wall and shot.

How the heck do you get those pins out of the fender without breaking them?

I worked for an hour prying and pulling, and the damn thing wouldn't budge, when I thought I finally had gotten it out, I found that it had broken off.

The more I work on my sister's G6, the more I appreciate my car, I replaced the headlight bulb on mine armed only with a flashlight on the side of the road in a snowstorm. :mad:
 

·
Decepticon Extraordinaire
Joined
·
5,348 Posts
Agreed but if you remove a few push pins around your top front bumper facia
and pull the light in the direction of the fenderline its much better.....
Just remember it doesnt come straight out. Pull at about a 45 degree angle in towards your cars nose.
You also need to tape up the bumper around the bottom of the light or you will
scratch it up when the light slides over it on its way out.

This was one of the reasons I designed a CAB intake to fit this car correctly.

Taking these headlights in and out all the time is just miserable.
 
1 - 3 of 3 Posts
Top