[wstump1969]

Has anyone out there tapped into the factory radio wire harness to connect their head units. I am thinking of just doing that and bypassing all the BS associated with adapters etc etc. Any help would be great, I already have the color diagram for the wires.

 

[Lampoon]

lets see what ya got...

 

[wstump1969]

2008 Pontiac G6 Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Red/White
Car Radio Accessory Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power or use the brown wire (+) at the ignition wire harness.

Car Radio Ground Wire: Black/White

Car Radio Illumination Wire: Pink

Left Front Speaker Positive Wire (+): Tan

Left Front Speaker Negative Wire (-): Gray

Right Front Speaker Positive Wire (+): Light Green

Right Front Speaker Negative Wire (-): Dark Green


Left Rear Speaker Positive Wire (+): Brown

Left Rear Speaker Negative Wire (-): Yellow

Right Rear Speaker Positive Wire (+): Dark Blue

Right Rear Speaker Negative Wire (-): Light Blue

 

[waterfowler76]

do you have a monsoon system? on mine there are four wires to each rear speaker...pos and neg for subwoofer and pos and neg for tweeter. look

http://www.crutchfield.com/app/Support/KnowledgeBase.aspx?ifs=pontiac g6

I just noticed you have an 08 and this info is for 05-07 hope it helps anyways

 

[mjgonegm]

Also if you do have a factory amp, and you do what your planning to do you will blow your factroy amp.... You can do what your planning just use a loc.

 

[Ensur3]

Just wondering. If you already have the wiring diagrams what do you need help with.

Just follow that and solder the wires it tells you to. And it should be cake.

If you have any other questions tho, what are they.

 

[getonerd]

good luck
i would do it in a pre-95 car i just suck it up and buy the adapters etc and save the headaches of fixing the damage u might cause