Pontiac G6 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
423 Posts
i want to put 'duals' on mine.....any ideas WHERE i might find a listing? i've searched the 'normal' websites, but no G6 applications.

help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :confused:
 

·
Registered
Joined
·
423 Posts
Psykostevo said:
You guys should check out my exhaust. I have a y-pipe after the resonator, and that's it. No muffler, no restrictions after the resonator. It sounds like a Mustang GT does basically. Not loud until you give it any kind of gas, and a rumble when you let off the throttle. The performance increase is amazing. I would estimate and easy 15hp. BTW, the tips are 3.5" rolled chrome anglecut tips.

Included is a pic of the GTP rear fascia installed on the stock G6 exhaust also.

I have an SE with every mod out there so far, and am waiting to have my new springs installed to drop it 1.7"s all around.

I've got the intake, CArbonfiber interior and exterior, ceramic coated engine covers and exhaust shields, chrome 17"s from the GTs. GTP rear fascia, underground lighting kit, speaker system, HID lighting, and more.

Here's how you get the resonator off. Step 1. Let the car cool down. Step 2. Plug in reciprocating saw. Step 3. Apply saw to exhaust and repeat as needed. Aside from that you have to unbolt the exhaust after the cats and un hang the muffler then cut the muffler off and pull the whole exhaust out. Not the easiest thing to do, but quite barbaric. There is no easy way, since the pipes were welded in place.

I also paid $67 for my fascia, and that is the going price....congrats on getting a hook up to get it for 44.50.
....to paraphrase the Dodge Ram Hemi commercials......."SWEET"!!!!!!!!!!!
did you have the 'y' pipe custom made or is there an aftermarket part available? I HAVE TO GET THIS DONE....NOW!!!!

AND, you have the 'CarbonFiber' interior pieces too? any pics of them? i tried to see them at my local dealer, but they didn't have them in stock and they hod no pictures yet. i'm not laying down that kind of $$ without knowing if i even like them. what all is involved with installation?

ALSO, i just put on the GM Accessory VentVisors (PN 17800852 for the sedan) on mine this past weekend and for those of you complaining about the 'buffeting' with the rear windows down, it helps alot, but doesn't entirely go away.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top