Pontiac G6 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
916 Posts
The picture is really tiny but the only thing i could think of is use a long set of angled pliers pick the piece of and you can see where the straight part goes and try and stick it in there and put some glue. That would be the only way without taking it apart.
Its a Pain in the A. to take the headlights apart if you dont have black sealant.
(im guessing its the low beam part that covers the bulb)
 

·
Registered
Joined
·
916 Posts
Well the problem for any of them i think would be getting them sealed right.
If moisture gets in them it sucks it will fog up and look bad. So maybe some clear silicone caulk would work? if you cant re-seal it. But if you take them apart and planing on doing some work like paint them or add lights i would do it all in one take. I took my headlights apart 3 times and wish i could have done it once LOL. Another option is maybe ebay for a headlight i see some on there once in awhile for not to expensive.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top